Weatherall UV Guard Log Cabin Stain- Wood Finish

Weatherall UV Guard: Maximum Protection for Log Homes

Best for: Cabin owners who want a professional three-coat exterior system with rich color and maximum long-term protection.

• System: Two coats of UV Guard Wood Finish followed by one coat of UV Guard Advance Clear.
• Coverage: Hand-peeled logs and planed lumber: 200–300 sq. ft./gal. first coat and 400–500 sq. ft./gal. subsequent coats. Milled logs and rough-sawn lumber: 150–250 sq. ft./gal. first coat and 300–400 sq. ft./gal. subsequent coats.
• Use: Exterior or interior log homes, timber frames, wood siding, and other vertical wood surfaces.
• Application: Brush or spray; back-brush as needed for even penetration.
• Cleanup: Soap and water before the product cures.
• Shipping: Typically 3–5 business days.

Why Choose UV Guard?

UV Guard is an acrylic wood finish formulated with UV absorbers and stabilizers to protect wood from sunlight, moisture, fading, and weathering while preserving visible grain and natural character.

Before You Apply

The surface must be clean, sound, and properly prepared. Remove loose or peeling coatings and test adhesion when applying over an unknown existing finish. UV Guard is not recommended for high-density, high-oil-content, or exotic woods.

Complete the System

Order enough UV Guard for two stain coats and enough Advance Clear for the final topcoat. Always test your selected color on the actual logs before ordering the full project.